LaCie 12big Rack Fibre 8 Manual de usuario descargar pdf (Pagina 16)

LaCie 12big Rack Fibre 8 System Overview

User Manual page 16

The following table provides a description of the LaCie 12big Rack Fibre 8 RAID Controller module’s LED indicators. Terms such as “right” and

“left” are used to describe locations, refer to Fig. 09 as the reference orientation.

Table 03 - The LaCie 12big Rack Fibre 8 RAID Controller Module - Icon & LED Status Indicators

Icon/LED Description

Battery Fault This LED is located in the group of controller LEDs on the right side of the face plate.

Illuminated Steady Amber - When the backup battery has low voltage, has experienced a time-out on charge

indicating a faulty battery, or has experienced a fault in the charging circuitry.

Cache Active This LED is located in the group of controller LEDs on the right side of the face plate.

✦ Illuminated Steady Amber - When the RAID Controller’s cache has data saved in memory but not written

to the disk array.

Controller Activity on Drives This LED is located in the group of controller LEDs on the right side of the face plate.

✦ Illuminated Steady Amber - When the RAID Controller has activity on the disk drives.

Controller OK This LED is located in the group of controller LEDs on the right side of the face plate.

✦ Illuminated Steady Green - RAID Controller operation is normal.

Controller Fault This LED is located in the group of controller LEDs on the right side of the face plate.

✦ Illuminated Steady Amber - A RAID Controller fault has occurred or the controller is booting.

Enclosure Invalid This LED is located in the group of controller LEDs on the right side of the face plate.

✦ Illuminated Steady Amber - Indicates the enclosure is not compatible with the module or the enclosure

has not yet been veriﬁed.

Ethernet Status These LEDs appear above the controller’s Ethernet port.

✦ Right Side Green - (Steady) Power on and heavy activity or possibly a fault. (Flashing) Normal activity.

✦ Left Side Green - (Steady) Power on and link established. (Flashing) Link is connecting and disconnecting

due to a failure.

FC Host Port Status These LEDs appear adjacent to the controller’s host Fibre Channel port:

✦ Amber = 8 Gb/s.

✦ Green = 4 Gb/s.

✦ Orange = 1 or 2 Gb/s.

- Steady when no activity but valid signal.

- Flashing to indicate activity.

- All LEDs ﬂashing indicates no valid signal.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 86 87

Sin comentarios

LaCie 12big Rack Fibre 8 Manual de usuario Pagina 16