LaCie 12big Rack Fibre 8 Manual de usuario descargar pdf (Pagina 23)

LaCie 12big Rack Fibre 8 Getting Started

User Manual page 23

2. Getting Started

2.1. Introduction

In this chapter, you are shown how to install your LaCie 12big Rack

Fibre 8 enclosure into an industry standard 19-inch rack cabinet and

cable the enclosure subsystem.

CAUTION: Use only the power cords supplied or those which meet

the speciﬁcation quoted in 7.5. AC Power Cords.

2.2. Planning Your Installation

Before you begin the installation, you should become familiar with

the conﬁguration requirements of your system. The correct positions

of each of the plug-in modules are shown in Fig. 21. Please refer to

sections 2.5. Cabling the Enclosures through 2.6. Cabling Multiple

Enclosures for details on cabling the conﬁgurations.

Table 06 - Enclosure System Conﬁguration

Module Location

Drive Slots ALL drive slots must have a drive carrier

module or dummy drive carrier module in-

stalled; no drive slot should be empty.

Power Cooling Mod-

ules

Two Power Cooling Modules must be in-

stalled in the enclosures.

RAID

Controller

(12big Rack Fibre 8)

Two RAID Controllers or one RAID Con-

troller plus one Blank I/O module can be

installed.

Disk I/O Module

(12big Rack Fibre Ex-

pansion)

Two Disk I/O Modules, or one Disk I/O

Module plus one Blank I/O module can be

installed.

CAUTION: Blank I/O modules or Dummy Carrier modules MUST

be installed in ALL unused bays or slots, otherwise there will be inad-

equate enclosure cooling.

Fig. 21 - Enclosure Bay Identiﬁcation

Fig. 22 - 12big Rack Fibre 8 RAID Enclosure Module

Locations

Fig. 23 - 12big Rack Fibre Expansion Enclosure Module

Locations

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 86 87

Comentarios a estos manuales

Sin comentarios

LaCie 12big Rack Fibre 8 Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Arrays de discos LaCie 12big Rack Fibre 8