LaCie 12big Rack Fibre 8 Manual de usuario descargar pdf (Pagina 43)

LaCie 12big Rack Fibre 8 Getting Started

User Manual page 43

2.7. Ethernet Connection

The controller can be connected to the network for

out-of-band management and monitoring via the

RJ-45 10/100 BaseT Ethernet port using the Embedded StorView

Management module and software.

Ensure that the host computer is connected either directly to or via

a switched LAN to the Ethernet port on the RAID Controller using a

shielded Cat 5 cable.

IMPORTANT INFO: Only shielded Cat 5 (or better) cables should

be used for connection to the Ethernet port for Electromagnetic

Compatibility Directive 89/336/EEC (EMC) conformance.

2.8. AC Power Cord Connection

1. Attach the power cords to the Power Cooling Modules (PCM).

Move the bale (AC Cable Strain Relief) sideways to expose the

socket, insert the power cord and move the bale over and onto

the cord. Repeat for the other PCM. Ensure the ON/OFF switch

is in the OFF position.

2. Attach the power cords to the Power Distribution Units, ensure

they use separate power sources.

IMPORTANT INFO: Before applying power, carry out the ground-

ing checks detailed in 2.9. Grounding Checks.

CAUTION: The power connections must always be disconnected

prior to removal of the power cooling module from the enclosure.

Fig. 59 - Cable Strain Relief Bales

Fig. 60 - Power Cord Connections

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 86 87

Sin comentarios

LaCie 12big Rack Fibre 8 Manual de usuario Pagina 43