LaCie 12big Rack Fibre 8 Manual de usuario descargar pdf (Pagina 31)

LaCie 12big Rack Fibre 8 Getting Started

User Manual page 31

2.4.1.2. Installing the Power Cooling Module

1. Check for damage, especially to the rear connector.

CAUTION: Handle the module carefully and avoid damaging the

connector pins. Do not install the module if any connector pins ap-

pear to be bent.

2. Slide the module partially into the enclosure (Fig. 32, Item 1).

3. Continue to push the module until it just begins to seat, grasp

the handle and close it until the latch engages. This action will

grab the camping mechanism on the side, and seat and secure

the PCM. (Fig. 32, Item 2.)

2.4.2. Drive Carrier Module

Disk drives are shipped installed in the enclosure with the anti-tam-

per locks engaged. To ensure the drives are installed correctly, fol-

low the prescribed rules in section 2.2.2. Drive Location Rules.

2.4.2.1. Removing the Drive Carrier Module

1. Carefully insert the lock key provided into the cutout in the han-

dle and into its socket (Fig. 33).

2. Rotate the key in a counter-clockwise direction until the “red”

indicator is not visible in the aperture beside the key. Repeat for

all the disk drives (Fig. 33).

continued on the next page>>

Fig. 32 - Inserting the Power Cooling Module

Fig. 33 - De-activating the Anti-tamper Lock

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 86 87

Sin comentarios

LaCie 12big Rack Fibre 8 Manual de usuario Pagina 31